Figure 11-10.--Magnetic amplifier controller Mod III.

Power Supply.-- The power supply performs two

COMPPENTS OF THE ICCP SYSTEM.--

functions. It converts available shipboard alternating

The following list of the components of the ICCP

system:

current (at) to low-voltage direct current (dc) and

Power supply

provides a means of adjusting the value of current

delivered to the anodes.

Controller

Controller.-- The controller (fig. 11- 10) is used to

Anodes

monitor the control power supply outputs that maintain

Reference electrode

the hull at a preset potential versus the reference cell.

Stuffing tube

The controller is a sensitive amplifier that creates an

output signal proportional to the voltage difference

Shaft grounding assembly

between the reference (electrode-to-hull) voltage and

Rudder ground (including stabilizer if installed)

the internally set voltage. The controller should be

mounted in a readily accessible area.

Dielectric shield

Figure 11-10.--Magnetic amplifier controller Mod III.

11-10