Figure 2-9.-QA Form 10, Re-Entry Control Log.

Figure 2-9.-QA Form 10, Re-Entry Control Log.

QA FORM 16, MATERIAL DEFICIENCY

this condition will have little or no effect on the

REPORT

equipment operation. If the release is authorized, the

reject tag and the Material Deficiency Report (QA Form

This form (fig. 2-11) is used to provide a uniform

16) must be filed in the QA office files, along with the

method of reporting and recommending disposition of

completely filled out QA form 15. Then, the released

rejected material to the supply department. It is used

material may be used, but one of the following three

where required to supplement QA Form 3 and instead

actions must be completed before the certification tiles

of QA Form 15. The report contains a descriptive

statement of material for a job order within the scope of

are completed.

this program and includes necessary sketches,

Material released for use and action complete

photographs, samples, and blueprints. This report

recommends a course of action.

Material released for use but must be re-worked

at a later date

QA FORM 17, TEST AND INSPECTION

FORM-OTHER THAN NDT

Material released for use but must be replaced at

a later date

This form (fig. 2-12) lists all the tests and

The use of QA Form 15 (fig. 2-10) requires the

inspections that must be performed at each step. A QA

initiation of QA Form 12, Departure from Specifications

Form 17 must be completed and signed off before any

step can be signed off on the QA Form 10.

Request.

2-22